1000W Wind Turbine Generator
Model:：SZ-1000
Rated Power：1000W
Maximum Powe：1050W
Rated Voltage：12V/24V
Star-up Wind Speed ：2.0m/s
Rated Wind Speed ：13m/s
Survival Wind Speed ：50m/s
Number Of Blades ：35
Wind Wheel Diameter：1.14m
Blade Material：Nylon Fiber
Type of Generator：Three-phase AC Permanent Magnet：Magnetic Steel Material NdFeB Control System：Electromagnet
Working Temperature：-40℃～80℃
Design Life：20 Years
Weight: Approx. 10kg
100W Solar Panels
Cell type: single crystal
Power: 100W
Working voltage: 18V
Open circuit voltage: 23.5V
Working current: 5.5A
Short circuit current: 5.8A
Efficiency: 21% (depending on sunlight conditions)
Working temperature: – 40 ℃ – 85 ℃
Connector type: M4C
Size: 1200 * 550 * 30mm
Weight: 6.3kg
12V 100Ah Lifepo4 Battery
Nominal Voltage: 12.8V
Nominal Capacity: 100Ah 0.2C
Built-in BMS:4S100A
Energy: 1280Wh
Cycle Life: ＞4000 cycles at 0.2C; End of life 70% capacity.
Charge Voltage: 14.6±0.2V
Charger Current: 20A
Max. Charge Current: 50A
Max. Continuous Current: 100A
Max. Pulse Current: 200A(＜3S)
Discharge Cut-off Voltage: 10.0V
Charge Temperature: 0 to 45℃ (32 to 113℉)
Discharge Temperature: -20 to 60℃ (-4 to 140℉)
Storage Temperature: 0 to 45℃ (32 to 113℉)
Water Dust Resistance: IP5
Case Material: ABS
Dimension (L/W/H): 330*138*208 mm
Weight: Approx. 13.2kg
Terminal Type: M8
MPPT Boost Wind Turbine Controller
Model: CWT-12/24
Working voltage: 12v/24 automatic identification
Maximum current: 40A
Protection: overcurrent, overload
Function: MPPT BOOST voltage control
MPPT Boost Wind & Solar Hybrid Controller
Voltage：12/24V AUTO
Rated Wind Power：100W-1500W
Rated PV Power：100W-600W
Max input Voltage：≤50V
Current (DC):≤0.05A
Control Mode:Wind generator MPPT boost ,PWM dump load,PWM Over current Limiting function
Output Working Mode(Mode):
Display r:LCD display,
Protection Type:Solar Reversed Charging protection, Battery open circuit protection, Battery anti-reverse connection protection protection, Over current and over voltage auto, Brake protection, Over load protection,etc.
Cooling Mode:aluminium profiles Heat dissipation and self-cooling
Working temperature :-25℃~+80℃
Weight :2.35kg
Controller Size/167mm*145.5mm*61.8mm
2000W Inverter
Model: ZX-2000
Rated power: 1000W
Maximum power: 2000W
Input voltage: 12v/24v
Output voltage: 220V
Output frequency: 50hz/60hz
Waveform: pure sine wave
Size: 300 * 98 * 55mm
Weight: 1.2kg
Dear customers:
Your positive comments is the driving force for our continuous improvement. We respect and trust every customer to provide you with qualified products and services. If you are satisfied with our products, please give us a five-star positive feedback. If you have any questions/problems after receiving the product, please contact us by Ali message as soon as possible and we will try to solve it for you positively at once until you are satisfied. While leaving a negative feedback will not solve any problems!
Thank you for your support
Dear customers:
1. The product warranty period is within 1 year after purchase. (Damage caused by dismantling, manual damage, etc. is not covered by the warranty).
2. If the buyer finds that there is indeed a problem with the product within seven days after receiving the product, buyer could applied to seller to return for inspection. If the product is indeed defective, we will replace it with a new one. If there is no suitable substitute And we will refund you. Shipping, handling and insurance fees are non-refundable. If it is found that there is no problem with the product, the product will be returned to the buyer at the buyer’s expense.
3.Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email.
4. After receiving the goods, pls remove the tape around the box when unpacking, without violent damage, to avoid potential damage to the goods. It is recommended to keep the outer packaging for at least 15 days after receiving the goods. When returning goods, please ensure the integrity of the original packaging and the goods. If there is any reason that affects the secondary sales of the goods, the return and exchange cannot be accepted. All cost of return and tax will be covered by buyer.
5. When receiving the goods, if you find that the outer packaging is damaged, you should immediately contact the local courier to make a complaint and claim, and at the same time take a photo or video as the evidence and inform the seller. If the buyer fails to follow the above operations , then if the goods are damaged or lost due to courier reasons, the buyer shall take the responsibility.
Follow us on: